Milestone Inspection Found Water Damage or Mold? Next Steps for Florida Condo Associations

If your building’s milestone inspection noted water intrusion, leaks or mold, the engineer and your contractors handle the structural repairs, while the wet materials and mold inside units and common areas need their own plan: find every wet area, fix the water source, dry or remove what’s wet, and have mold over 10 square feet removed by a Florida-licensed mold remediator before walls are closed. FL Cleanup works with associations and managers across Miami-Dade, Broward and Palm Beach. Call 877-224-2532.

This is general information, not legal or engineering advice. Your engineer or architect, association counsel and insurers have the final word on what your building needs.

What a Milestone Inspection Is

Florida requires milestone inspections for condominium and cooperative buildings that are three or more habitable stories tall. The first one is generally due by December 31 of the year the building turns 30, or 25 where the local building department requires it for buildings within three miles of the coast, and then every 10 years. A licensed architect or engineer does the inspection. Miami-Dade and Broward also have their own long-running building recertification programs, so ask your engineer which rules apply to your building.

Water Findings We See in These Reports

  • Leaking windows and sliding doors, with staining or soft drywall below them
  • Balcony and exterior wall cracks letting water into units
  • Roof and roof drain leaks into top-floor units and stairwells
  • Water staining in garages, pipe chases and mechanical rooms
  • Musty smells or visible mold in units, hallways or utility rooms

The engineer’s job is the structure. Wet drywall, wet insulation, swollen flooring and mold behind baseboards are a different job, and they keep getting worse while the structural work is being planned.

Next Steps for the Board and Manager

  1. Ask the engineer to separate the items: structural repairs, water sources that need to be stopped, and interior water or mold findings.
  2. Map moisture in the affected units and common areas. We use moisture meters and an infrared (thermal) camera to see where water has spread behind walls and under floors, unit by unit.
  3. Stop the water first. Drying or removing mold before the window, roof or wall leak is fixed means doing it twice.
  4. Plan mold work properly. In Florida, mold remediation of more than 10 square feet must be done by a licensed mold remediator. Under Florida law, the company that does a mold assessment can’t also do the remediation on that building within 12 months, so many associations use an independent assessor for testing and a separate remediator for the work. More in do I need a mold inspection before remediation?
  5. Keep records by unit and area: photos, readings, invoices and any clearance results. Owners, insurers and future buyers will ask.

During the Repair Work

Concrete restoration, window replacement and balcony work open the building up. Rain can get in through temporary openings, and dust spreads into occupied units. We offer jobsite protection and dust containment for contractors working in occupied buildings, and we can dry any unit that takes on water during the project.

Why This Matters for Owners

Owners in older buildings are already dealing with inspections, special assessments and repairs. Getting the water and mold handled cleanly and documented once saves arguments later about who pays for what. See condo leak from upstairs: who pays? and water damage in older condo buildings.

FAQ

Does FL Cleanup do milestone inspections?

No. Milestone inspections are done by licensed architects and engineers. We handle the water damage, drying and mold work that comes out of them.

Can you work in occupied units while repairs are going on?

Yes. We coordinate access through management, set up containment where needed and work around residents’ schedules where we can.

What credentials should we look for?

Florida mold licenses, IICRC certification, real liability coverage and building experience. FL Cleanup holds Mold Assessor MRSA4035 and Mold Remediator MRSR4158, is IICRC certified, carries $1 million in general liability and is enrolled with Miami-Dade County as a vendor for large losses. See how to choose a water damage company for your association.

We answer 24/7; when you call, we’ll tell you honestly when a crew can be there based on that day’s schedule. Ask us about a free walkthrough and Emergency Response Plan for your building. Hablamos español.

About the author: James Rice-Peña founded FL Cleanup, a family-owned South Florida restoration company serving homeowners and buildings since 2016. He has worked in restoration since 2012, has completed more than 5,000 water jobs, has served as a mold expert in attorney cases, is a Florida-licensed Mold Assessor (MRSA4035) and Mold Remediator (MRSR4158), and is IICRC certified. FL Cleanup has 200+ five-star Google reviews.

Facebook
WhatsApp
Twitter
LinkedIn
🔒Your information is 100% secure
By providing your contact information, you give FLCleanup written authorization to contact you via email, phone call, text, or other messaging technology to discuss products, services, and your account.